XUZHOU FOCUS INDUSTRY GROUP CO., LTD.
news
Products

Liugong Loader Parts 2

Working Principle Of Walking Motor Of Liugong Loader Parts


Many Liugong loader parts have different working principles. High-speed motor and planetary reducer or cycloid gear reducer are commonly used in walking motors, while the control of the loop of hydraulic motor has its characteristics.

The motor is equipped with high voltage automatic variable device. When the high-speed gear is hung up, the circuit connects the manual transmission oil inlet to drive the transmission valve to move left, so that the motor becomes small displacement. If driving resistance increases and the oil pressure rises to the set value, the oil pushes the transmission valve to the right and the motor automatically turns into a large displacement low-speed gear to increase torque. Therefore, this kind of motor can automatically shift gears with the change of walking resistance.

In addition, the control of the motor is mainly completed by the motor control valve, and the working principle is analyzed in combination with the structure schematic below. Suppose oil enters from inlet A and the motor rotates, the operations of motor control valves are as follows:

1.Open the check valve and the hydraulic oil enters the right chamber of the motor.

2.The hydraulic oil enters the balance valve through the throttling hole and moves it to the left, connecting the brake oil circuit and releasing the brake. This action also connects the return oil circuit of motor port B.

3.The hydraulic oil enters the buffer piston chamber through the middle throttling hole of the safety valve and pushes the buffer piston to the left. If the system pressure exceeds the set pressure of the relief valve (10.2mpa) at this time, the safety valve will be opened instantly, acting as a buffer.

4.If the motor is overspeed (e.g., downhill) and the pump has no time to supply oil, the pressure of port A will be reduced. The balance valve moves to the right under the action of spring force and closes the return oil channel of the motor to limit the motor speed.
Related News
  • JY623E Crawler Excavator

    JY623E Crawler Excavator

    October 24, 2018JY623E crawler excavator (using today's advanced and mature hydraulic technology, machining technology and mechatronics technology)view
  • Double Steel Wheel XD143

    Double Steel Wheel XD143

    January 19, 2019XD143 Vibration Roller is an asphalt compacting machinery product independently developed by XCMG Road Machinery Division, which has accumulated many years of research and development experience in co...view
  • China Cummins Engine 2

    China Cummins Engine 2

    August 21, 2018Advantages of Cummins engine:1.Fuel-efficientThe advanced design and excellent manufacturing of Cummins makes the fuel consumption much lower than similar products.2.Strong powerThe design of exhaust ...view
  • XD133 Roller Series with Double Steel Wheels

    XD133 Roller Series with Double Steel Wheels

    January 19, 20191. The front and rear frames adopt the current mainstream frameless structure, which enlarges the vehicle approach angle and departure angle, and effectively improves the edge-binging compaction perfo...view
  • Buy Wheel Loader 2

    Buy Wheel Loader 2

    August 21, 2018Precautions for purchasing wheel loader tiresUnder the specific conditions of use, it should have better comprehensive performance and higher service life.The wheel tread pattern of wheel loaders shou...view
  • One Carton Liugong Roller Spare Parts Delivered To Ecuador In May

    One Carton Liugong Roller Spare Parts Delivered To Ecuador In May

    December 28, 2017This week we exported one carton Liugong roller spare parts to Ecuador.Liugong roller parts have a hot sales all parts of the country.The parts are one of ourfirst, and still one of our most popular p...view
  • TEL:+8615862203425
  • FAX:+86-516-83895529
  • EMAIL:info@cnfocusgroup.com
  • ADDRESS:F13, Building A, Greenland Yinghai, Qingfeng Road, Xuzhou City, Jiangsu Province, China (Mainland)